Unboxing and Primary setup:
- Unbox the printer and remove the contents.
- Remove all the orange tape from the front and back of the printer.
- Open the cartridge access door.
- Pull out the protective foam from the cartridge access area.
- Take the toner cartridge and keep it aside.
- Remove the packing material inside the printer.
- Grab the toner cartridge and gently shake it from left to right to distribute the toner evenly.
- Take out the orange clip from the toner cartridge.
- Now, remove the sealing tape from the toner cartridge.
- Insert the toner cartridge firmly into its slot.
- Close the cartridge access door.
- Attach the input and output tray extender.
- Connect one of the ends of the power cable to the back of the printer and the other end to the electrical outlet.
Note: Don't connect the USB cable between the printer and computer until you are prompted to do so during the software installation.Press the ON button on the printer.