HP Laserjet M110WE Setup

HP LaserJet M110we is the world's smallest laser printer that can print your documents at a blazing speed. This is a multifunctional printer that can print, scan, and copy. Therefore, you don't need a separate scanner or copier to get your job done. If you want to learn HP LaserJet M110we printer setup , read on...

HP LaserJet M110WE Unboxing Setup

Unpack Your HP LaserJet Printer

  • First, open your printer box. Next, remove all the included items from the box.
  • Dispose of the protective tapes and packing covers from the HP printer and its components.

Reinstall The Toner Cartridge

  • Open the printer’s cartridge door and take out the pre-installed toner cartridge.
  • Remove the protective film and orange tapes from the cartridge. Then, re-insert the toner cartridge into its holder and close the cartridge door.

Inserting Paper On HP LASERJET M110WE

  • Pull out the input tray and move the paper guides all the way out.
  • Take a paper stack and fan the sheets neatly.
  • Load the stack into the input tray and adjust the guides against the stack.

Connect The Power Cord

  • Connect the given power cord to your printer's rear port and an electrical outlet.
  • Turn on your HP printer by pressing its Power button.
  • Choose your preferences on your printer control panel, including the language, country, date, and time.

Connect HP LaserJet M110WE Printer And Computer Via HP Smart

  • Now, let's start connecting the printer and computer using HP Smart.
  • To begin with, visit HP's official support page and download the HP Smart app.
  • You can also get this application from Microsoft Store and App Store.
  • Install the HP Smart software on your computer just like you install any other application.
  • Launch the HP Smart app and click the + icon that’s located below the Add a printer option. When it shows you the available printers, pick your HP LaserJet M110we printer.
  • In a few moments, a connection will be established between your HP printer and computer.
  • From now on, you can access your printer from your computer.

HP LaserJet M110WE Driver Download

HP Smart is compatible with Windows 8 and later versions. Therefore, if you are using the previous versions of Windows, you should get the compatible driver from HP's website to access your printer. The instructions provided below will surely guide you through the whole procedure in detail.

  • Go to your computer and open a web browser you prefer.
  • Visit HP's official support page.
  • Input your printer model - HP LaserJet M110we in the search area. Click on the Submit button.
  • When it takes you to the product support page, click Software, Drivers and Firmware.
  • Now, it shows you a list of drivers compatible with your OS.
  • Click on the Choose a different OS link, in case you wish to get the driver for a different OS. Next, pick the Operating System you prefer.
  • When it shows you a list of compatible drivers, select the driver of your choice (that is supported by your printer and by your OS) and click the Download button.
  • Now, the chosen driver will start downloading. Once done, you can access it in the Downloads folder of your computer or in the Downloads section of your web browser.

HP LaserJet M110WE Driver Installation

  • When the printer driver file gets downloaded to your computer, find it and run the setup file.
  • Go on with the on-screen prompts and pick the desired connection method when you are requested to do so.
  • You need to connect the HP LaserJet M110we printer and your computer according to the connection type you have picked.
  • If you’ve picked the wireless connection option, input your router's password in the respective field.
  • Also, make sure to connect your printer to the same network to which your computer is connected.
  • In case you’ve chosen the USB connection option, connect the USB cable (between the printer and the computer) when you are instructed by the installer.
  • Go ahead with the on-screen instructions and complete the printer driver installation.

HP LaserJet M110WE Wireless Setup

If you complete your HP printer's wireless setup, you don't have to connect your printer and computer via any cables. The following instructions will show you the procedure in detail.

  • Before starting, ensure that your printer is not too far from the router.
  • Press your router's WPS button.
  • Now, press and hold your printer's Wi-Fi button.
  • In a short duration, a connection will be established between your HP LaserJet M110we printer and computer.
  • Visit HP's official website and download the HP Smart application. You can also get the app from Microsoft Store and App Store.
  • Now, install the app on your computer.
  • Open the HP Smart application and click on the + icon (you can easily locate it under the Add a Printer option).
  • Next, choose your printer's name when it shows you a list of nearby printers.
  • When prompted, create or sign in to your HP account.
  • From now on, you can access your printer wirelessly from your computer.

HP LaserJet M110WE Print Setup

  • Connect your printer and computer via Wi-Fi or USB.
  • On the computer, open the document/image you want to print and click the Print command.
  • Ensure that your HP printer is selected in the Printers section.
  • Click Properties/Preferences to open the printer driver.
  • If needed, alter the settings according to your preferences and click OK to come back to the Print dialog box.
  • Choose the required number of copies. Click the OK button.
  • Now, your HP LaserJet printer will start printing the document/image you have opened.

HP LaserJet M110WE Troubleshooting

Troubleshooting solutions enable us to tackle the ongoing printer issue. In this section, we have covered some of the best tips and techniques to handle the problems on your HP LaserJet M110we printer.

HP Laserjet M110we Factory Reset

When you restore your printer to the factory defaults, every setting you have configured so far will be erased, and your printer will return to the factory settings. You can factory reset your HP LaserJet M110we printer via the Embedded Web Server (EWS). Follow these instructions to proceed further.

  • The Embedded Web Server works when you connect your printer to an IP-based network. Therefore, connect your printer to a network. Moreover, to open EWS, you must be aware of your printer's IP address. Therefore, print a network configuration page and know your printer's IP address in the first place.
  • Now, go to your computer, launch a web browser you prefer, and enter the IP address in the URL field.
  • When the Embedded Web Server opens, go to the System tab and select the Service option.
  • Click the Restore defaults button in the Restore Defaults section.
  • Now, your printer will restart.
  • If you want to restore only the network settings, you can do it on your printer control panel. To do it, press the Wireless button and hold it for the next 20 seconds.
  • When the Attention light starts flashing, release the Wireless button. Now, your printer restarts automatically.
  • This is how you should restore your printer to the factory settings.

HP LaserJet M110WE Not Printing

Check The Fundamentals

  • If your HP LaserJet M110we printer is not printing, check the power outlet.
  • Check if your printer shows any error codes. If so, rectify them with the appropriate solutions.
  • If there is a paper jam on your printer, it will not print anything. Therefore, remove all the jammed paper from the specified location and resume your printing job.

Check The Connection

  • If you cannot print your documents from your computer, check the connection between your printer and computer.
  • Suppose you have connected your devices using a USB cable, see if the cable is working fine and connected to both ends firmly.
  • In case you have connected your devices over a network, check and confirm that they are connected to the same network.

Set HP LaserJet M110WE As The Default Machine

  • It is essential to set your printer as the default machine on your Windows computer. This enables your computer to send every document to the right printer every time. Follow these instructions to set your HP LaserJet M110we printer as the default machine.
  • On your Windows computer, click Start and search for “control panel.”
  • When it shows you the search results, click on the right option. In the Control Panel window, select Hardware and Sounds> Devices and Printers.
  • Right-click on your HP LaserJet M110we printer. Next, choose the Set as default printer option.
  • By now, the “not printing” issue should be rectified and your printer should be able to print without any further problems.

HP LaserJet M110WE Not Connecting To Wi-fi

Check The Basics

  • Make sure that your HP printer doesn't show any error code. In case it shows any error code, resolve it with the appropriate solutions.
  • If you have kept your printer and router farther, bring them closer and see if your problem is fixed.
  • Your HP printer and computer should be connected to the same network. In case they are connected to 2 different networks, your printer will not appear online.
  • If you have changed your router's password, see if you have updated the same on your printer. If you don't do this, your printer cannot connect to your Wi-Fi network.
  • If the real problem exists with the router, restarting it can fix the trouble. Therefore, give it a try and see if it works.

Remove And Re-add Your Printer

  • Removing your printer from the Devices and Printers section and re-adding it can help you fix the Wi-Fi connection issue efficiently.
  • Now, navigate to the Devices and Printers section of your Windows computer.
  • Right-click on your HP LaserJet printer and select the Remove the Device option.
  • Restart your printer and re-add it in the Devices and Printers section.
  • Now, see if your printer can connect to your Wi-Fi network.

This way, you should perform HP LaserJet M110WE setup. For further queries, reach our technical experts using the Call button we have provided on this page.

Call Us
Antivirus Setup