Box Contents:
- Printer documentation
- Software-Installation CD
- HP LaserJet Print Cartridge
- User Guide
- Power Cord
- HP LaserJet 1020 Plus printer
Check whether all the above contents are available in the box
Hardware Installation:
- Take out the printer from the box.
- Remove all the tapes and packing materials around the printer.
- Clear the foam sheet and protection film from the scanner.
- Open the paper tray and then slide out the paper width and length guides as far as possible.
- Now, load the paper into the paper tray and then slide the paper width and length guides until they touch the stack’s edges.
- Now, close the paper tray.
- Open the front cartridge door and pull out the toner drawer.
- Remove all the packing materials inside the cartridge area.
- Unwrap the cartridge from the box.
- Clear any tapes or clips from the cartridge.
- Now, install the new cartridge into the respective slot.
- Push the toner cartridge drawer into the printer and close the cartridge door.
- Next, just connect the power cable to the back of your printer and an electrical outlet.
- Finally, you need to press the Power button to turn on the printer.
Now, the hardware installation setup for the HP LaserJet 1020 Plus printer is completed.