HP Envy Photo 7855 Setup - Simple Instructions

Are you looking for a way to set up your newly purchased HP ENVY Photo 7855 printer? No worries! You are on the right site. The printer setup is a crucial process that you need to perform before you start to work with it. So, without any trouble, you can complete your printer’s hardware and software HP Envy Photo 7855 Setup by following the below instructions.

HP Envy Photo 7855 Hardware Setup

Contents Inside The Box

Before starting the printer’s hardware setup, ensure that all the contents below are available inside the package.

  • HP ENVY Photo 7855 printer
  • HP 64 Black Cartridge
  • HP 64 Tri-Color Cartridge
  • Ink Caution Flyer
  • Setup Card
  • Getting Started Guide
  • Power cord
  • Phone Cord
  • Instant Ink Flyer
  • Media Pack

Unboxing The HP Envy Photo 7855 Printer

  • First, select a proper location to keep your printer. If you have a sturdy table surface, you can use it to place the printer and also operate it.
  • Once you’ve placed the printer box on the table, open the box and remove the printed documentation and ink cartridges from the package.
  • Take out the rest of the printer accessories from the box.
  • Use both your hands and slowly pull the printer out of the box. Discard the foam packing materials from both sides of the printer.
  • Separate the printer from its plastic cover and discard the blue protective tapes around the HP ENVY Photo 7855 printer.
  • Make sure to dispose the packing materials from the scanner glass, ink cartridge area, and paper tray. You can keep them aside and then recycle them later on.

Powering On The HP Envy Photo 7855 Printer

  • First, connect one of the ends of the power cord to the printer’s rear section and plug the opposite end into a wall socket.
  • Turn on your printer by pressing its Power button.
  • Go to the printer’s control panel and finish the initial setup.

Installing The Ink Cartridges

  • First, you need to lift the ink cartridge door.
  • Next, remove one of the ink cartridges from its package.
  • Get rid of the protective tape from the cartridge. Slowly insert the ink cartridge into its slot on the HP ENVY Photo 7855 printer.
  • Now, go ahead and repeat the above instructions to insert the remaining ink cartridge into the respective slot. Once done, you can close the ink cartridge door.
  • Tap OK on the HP ENVY Photo 7855 printer screen after installing the ink cartridges.
  • Now, proceed with the next step (loading paper) in the HP ENVY Photo 7855 setup.

Loading The Paper On HP Envy Photo 7855 Printer

  • Pull out the input tray and remove the output tray from your printer.
  • Move the paper width guide as far as possible.
  • Take a stack of paper. Fan and align the sheets in the stack neatly.
  • Load the stack into the input tray. Refrain from loading curled or damp sheets.
  • Because, if you do, you might end up with paper jamming or feeding issues.
  • Adjust the paper width guide such that it touches the edges of the stack.
  • Reinstall the output tray and then insert the input tray into the printer.
  • Tap OK on the printer screen to confirm loading sheets inside the paper tray.
  • Next, perform the on-screen prompts on your printer and complete the alignment process.

With the above step, you have finished the hardware part of the printer setup.

HP Envy Photo 7855 Software Setup

Once you execute the software installation, the entire HP ENVY Photo 7855 setup will be over.

The driver download and installation are explained in the upcoming sections. You can also connect your HP Envy printer to your computer over a USB or wireless connection during the driver installation itself.

Now, read on to find out more...

HP Envy Photo 7855 Driver Download

If you want to utilize your HP ENVY Photo 7855 printer features directly from your computer, you need to download and install the driver that supports your computer’s OS. The driver helps your computer understand the printer’s technical details and vice versa. The printer driver also assists the printer in carrying out the assigned print jobs. You can download the driver by visiting the official support page of your HP ENVY Photo 7855 printer. Perform the below instructions to do the same:

  • Open a web browser on your computer and then visit the official support page of your printer to download the driver.
  • Next, click on the Support tab at the top and select the Software and drivers option from the list.
  • Now, choose the Printer category.
  • Input your printer model name in the respective field below the Enter your product name option and click on the Submit button.
  • Your computer’s Operating System will be shown automatically at the top of the page in the next window.
  • Next, focus on the HP ENVY Photo 7855 printer’s driver file that you want to download from the list. Now, click on the Download button located beside or opposite the selected driver.
  • You will find that the driver file starts to download on your computer.
  • Once it is completely downloaded, you can access it from the Downloads folder of the computer or in the Downloads section of your web browser.

HP Envy Photo 7855 Driver Install

The HP printer driver installation is a crucial process you need to perform once you have downloaded the file from the official support page. If you have the installation CD, then it is very simple to install the driver on your computer. Just load the CD on your computer and stick to the on-screen prompts.

  • However, if you’ve downloaded the printer driver file from the official support page, launch the file to start the driver installation process.
  • Click Run in the Security Warning window.
  • Wait for some time to extract the setup file.
  • Now, you need to select the “I have reviewed and accept the installation agreements and settings” checkbox in the Installation Agreement and Settings window.
  • Click the Next button to proceed with the installation process.
  • Now, the software will start to install on your computer.
  • You will be asked to connect your HP ENVY Photo 7855 printer and computer in the Connection Options window. Choose the type of connection that you wish to use and click Next.
  • Now, just stick to the on-screen prompts to complete the driver installation on your computer.

[Toll-free: If you wish to set up or fix your printer issues quickly, contact our technical experts. You can utilize the button provided below for the same.

Call Us

HP Envy Photo 7855 Wireless Setup

Wireless Setup Using Router

  • Make sure to turn on your HP ENVY Photo 7855 printer.
  • Get your wireless network name and password and note them down.
  • Now, go to the printer’s control panel and tap the Wireless icon.
  • Touch the Settings icon.
  • Select the Wireless Settings option.
  • Tap the Wireless Setup Wizard or Wi-Fi Protected Setup option from the list.
  • Choose the Yes button to confirm. Now, your printer will start to search for the wireless network.
  • Once detected, tap the wireless network name and touch the OK button.
  • Enter your network password and follow the prompts on the printer screen to complete the wireless setup.

HP Envy Photo 7855 Usb Setup

Using the USB connection setup, you can easily connect your printer to your device and complete the installation. To do so, perform the below instructions carefully.

  • First, start installing the printer driver on your computer.
  • Continue with the prompts on your computer screen.
  • Pretty soon, you will be instructed to select the connection type.
  • Here, choose the option for USB connection.
  • Now, you’ll be prompted to connect your HP ENVY Photo 7855 printer and the computer.
  • So, take a USB cable and connect it between the printer and computer.

Thus, by sticking to the above procedure, you can finish your HP ENVY Photo 7855 USB setup.

HP Envy Photo 7855 Print

  • Before you start to print a document from your printer, load the paper into the input tray.
  • Open the document/file (you want to print) on your computer and select File -> Print.
  • Make sure to select your printer from the available device list.
  • Now, open the Properties dialog box.
  • Here, select the Layout tab and choose the Orientation option you want to use from the drop-down list.
  • Click the Pages per Sheet drop-down list and choose the option you wish to use.
  • Next, select the Paper/Quality tab and set the media type, print quality, and color settings.
  • Click on the Advanced button and choose the paper size setting.
  • Close the Properties dialog box by selecting OK at the bottom of the window.
  • Finally, click the Print or OK button to begin the printing process.

You can complete the printing process on your HP ENVY Photo 7855 printer by following the above instructions.

HP Envy Photo 7855 Scan

Follow the below instructions to scan using your HP ENVY Photo 7855 printer.

Enable Scan To Computer

  • Prior to scanning, ensure that you have completely installed the printer and scanner software on your computer.
  • Ensure to turn on your HP ENVY Photo 7855 printer and connect it to your computer.
  • Now, launch the HP printer software on your computer.
  • Select the Print, Scan & Fax option at the top of the window.
  • Click on the Scan option.
  • Next, select the Manage Scan to Computer option.
  • Click the Enable button.

Scanning A Document Or Photo

  • First, raise the printer’s scanner lid and load the document with the print side facing down on the scanner glass.
  • Otherwise, load the original with the print side facing up in the automatic document feeder.
  • Now, select the Start menu on your computer and navigate to the HP software. Pick the Print, Scan & Fax option at the top of the window.
  • Next, click on the Scan tab.
  • Choose the Scan a Document or Photo option from the list.
  • Now, select the type of scan you want and choose the preferred scan settings. Do not forget to select the location (like a folder) to save the scanned document.
  • Finally, click the Scan button.

HP Envy Photo 7855 Copy

  • Make sure to insert a stack of plain white sheets into the paper tray.
  • Raise the scanner lid of the printer.
  • Load the document with the copy side facing down on the scanner glass.
  • Tap the Copy option on the printer’s home screen and choose the number of copies you want.
  • Once you have completed choosing all the settings, tap the Start Black or Start Color button to make a copy.
  • The printer will start copying the document in two seconds.

You can complete the copying process on your HP ENVY Photo 7855 printer by following the above procedure.

HP Envy Photo 7855 Troubleshooting

Every printer issue happens unexpectedly. The most common printer problems might occur due to connectivity or hardware and software issues. If you encounter any problem with your printer, you can use the relevant troubleshooting solution to fix it. By following the below instructions, you can troubleshoot and solve the problems with your HP ENVY Photo 7855 printer.

HP Envy Photo 7855 Error Code D80774ec

Reconnect The Printer

  • If you have already turned on your HP printer, turn it off and unplug its power cord.
  • Turn off your wireless router and wait for some time.
  • If you’ve connected your printer and computer using a USB cable, then remove it.
  • Now, restart your computer and wait until your device turns on.
  • Turn on your router again by connecting the necessary cables.
  • Otherwise, connect your printer and computer using a USB cable.
  • Next, plug the power cord into the back of your printer and the other end into an electrical outlet.
  • Turn on your HP ENVY Photo 7855 printer and check if your printer shows the error code “D80774EC” again. If yes, perform the troubleshooting method given below.

Reset Your Printer

  • Make sure to turn on your HP ENVY Photo 7855 printer.
  • Now, go to the printer’s control panel. Navigate to the Setup icon and touch it.
  • Tap the Printer Maintenance option from the list.
  • Touch the Restore option on the printer screen.
  • Choose the Restore Settings option.
  • Scroll down the screen and select the Restore Factory Defaults option. Tap the Continue button to confirm.
  • Now, your HP printer will restore all the settings to their factory defaults.
  • Within a few moments, you will see a message on the printer screen stating that your printer defaults have been restored. Tap the OK button and check if the issue is solved.

By now, the error code “D80774EC” must be fixed, and your printer should work normally once again.

HP Envy Photo 7855 Clean Printhead

Automatically Clean The Printhead

  • First, load the plain white sheets into the input paper tray of your printer.
  • Next, go to the Start menu on your computer’s home screen and navigate to the HP folder from the left menu panel of the window.
  • Select HP Utility from the HP folder.
  • Choose your printer name from the available device list in the left menu panel.
  • Click on the Clean Printheads option.
  • Select the Clean option.
  • Now, perform the on-screen prompts on your computer and complete the printhead cleaning process.

HP Envy Photo 7855 Poor Print Quality

Clean The Ink Cartridges

  • Ensure to turn on the HP ENVY Photo 7855 printer.
  • Next, open the ink cartridge access door and wait until the carriage stops moving.
  • Push the tab and remove each ink cartridge from the respective slot. If any cartridge is attached with the orange protective tape, remove it.
  • Clean the vent at the top of each cartridge.
  • Now, insert all the ink cartridges into their slots. Make sure that all the cartridges are installed correctly in their places.
  • Close the ink cartridge access door.
  • Next, check whether the “poor print quality” issue is resolved.
  • If the issue continues, check the estimated ink levels in the cartridges.

Check The Estimated Ink Levels

  • Make sure to turn on your printer.
  • Now, go to the control panel of your printer and tap the Ink icon.
  • The estimated ink levels of each cartridge will appear on the printer screen.
  • If you see that any ink cartridge level is low or empty, replace that particular cartridge with a new one.
  • In case no ink levels are low, then you are using a defective or incompatible cartridge on your printer. Replace those ink cartridges with new ones, which is described in the next section.

Replace The Ink Cartridges

  • Check if the printer is turned on. If not, turn it on now.
  • Now, lift the ink cartridge access door and wait until the carriage stops moving.
  • Push the tab and remove the defective or incompatible ink cartridge from the respective slot.
  • Unpack a new ink cartridge from the package.
  • Discard the protective tapes from the cartridge. Now, insert the new ink cartridge into the respective slot.
  • Make sure that the cartridge is properly installed in its place.
  • If you want to replace any other defective or incompatible ink cartridges, follow the above instructions.
  • Close the ink cartridge access door and ensure that the issue is solved.

You can troubleshoot and fix your HP Envy Photo 7855 Setup issues by following the above instructions.

In case you have any other problems with your printer, contact our technical experts using the call option on this page.

Antivirus Setup