Hardware Setup:
- Unpack the printer from the carton.
- Remove all the protective tapes and packing materials around the printer.
- Open the front door of the printer.
- Discard all the packing materials below the cartridge access door.
- Now, open the cartridge access door and discard the protective tapes and cardboard box inside the printer.
- Close the ink cartridge door.
- Remove the ink cartridge, power cord, and USB cable from the cardboard box.
- Now, plug one end of the power cord into the back of the printer and the other end into an electrical outlet.
- Turn on your HP 4729 printer.
- Open the ink cartridge access door. Now, the carriage will move to the center of the printer.
- Take the ink cartridges from the package and discard the protective tapes from it.
- Now, insert the ink cartridge into the respective slot.
- Repeat these steps to install the remaining ink cartridges on the printer.
- Close the ink cartridge access door and the front door of the printer.
- Lift the input tray and slide the paper width guides to the left.
- Now, load the paper into the input tray and adjust the paper guides to fit the paper.
- Pull the output tray and its extender from the printer.
Follow the above instructions to complete the hardware setup on your printer.